2025, the annual 3D printing industry roadmap, ready to trigger.
In 2025, the 3D printing industry will open a new series of technological iteration and industrial upgrade. In order to help industry practitioners, researchers or enthusiasts to effectively plan the annual 3D printing route, the resource library combines industry dynamics and information from several parties to organize exhibitions and most precious 3D printing forums in 2025.
The following activities are organized in chronological order, covering technical display, academic seminars and commercial connections, helping you to effectively plan your route.
1. 2025 Shanghai International Additive Manufacturing Application Technology Exhibition (AM China)
2 ，2025 Asia 3D Printing and Additive Manufacturing Exhibition (TCT asia)
Official site exhibition:www.tctasia.cn
Since its first outfit in Shanghai, China, in 2015, the TCT Asia exhibition has become the largest 3D printing exhibition in Asia. The exhibition is known as the “technical weather palette” of 3D printing and is an important step for a competitive exhibition of companies in the industry. treatment. After its successful participation in 2024, the exhibition in 2025 will extend to 45,000 square meters and will continue to adopt a double exhibition hall, which should attract more than 450 exhibitors and more than 30,000 professional visitors.
3. 2025 US 3D Printing and Additive Exhibition (Rapid and TCT)
Official site exhibition:www.rapid3devent.com
Rapid + TCT is the largest and most authoritarian event in the 3D printing industry in North America. The event will attract participants from all walks of life, including manufacturers, suppliers, technology suppliers, academics and researchers, to discuss and demonstrate the latest 3D printing technologies and solutions. The exhibition will showcase open speeches daily, multiple opinion leadership groups and interactive conferences of experts and industry pioneers, covering additive manufacturing trends in health care, Aerospace, defense, automobile and more.
4. 2025 International conference on borders and application of additive manufacturing technology and the 9th National Youth Scientist Forum on additive manufacturing
The aim of this conference is to bring together the best academics, industry experts and entrepreneurs in the field of additive manufacturing to jointly exchange research results, applications innovation trends and industrial development prospects additive manufacturing technology. By building a high-level university exchange platform, we will promote in-depth exchanges and cooperation in additive manufacturing technology, and promote the advancement of additive manufacturing technology and industry to high -end and intelligent directions. In addition, the forum on border scientists in the manufacture of ceramic additives and the innovation 4D forum for innovation will be held during the same period.
5. 2025 Shenzhen International 3D Printing, Additive Manufacturing and Precision Forming Exhibition (Formnext Asia Shenzhen)
Official site exhibition:www.formnet-shenzhen.com
In 2025, The Formnext Shenzhen Exhibition Completed Its Brand Reshaping, and the Exhibition Name Changered from the original Formnext + PM South China to the Shenzhen International 3D Printing, Addive Manufacturing and Precision Forming Exhibition (Formnext Asia Shenzhen), Focusing More On The 3D Printing industry. The exhibition covers the entire industrial manufacturing channel additive and is one of the important 3D professional printing exhibitions in China. Its parental exhibition, Formnext, Germany, is the largest exhibition in the global additive manufacturing industry.
6.
time:September (provisional)
Place:Hefei (provisional)
hostunit:Material in polymer and engineering branch of the Chinese Society for Research on Materials
This is the first vertical forum in China by focusing on 3D printed documents, sponsored by China Society of Materials Research, an organization authority in the Community of Materials, by focusing on the problems “Toulots ‘Fields “of polymer materials. The forum will focus on two subjects: industry and medical care, and more than 100 experts and academics should participate in sharing. The 2025 problem can focus on pain points such as “conformity of the communication resin of communication” and “temperature -resistant engineering plastics”.
7. The 8th 3D China International 3D printing conference in 2025
Official Conference website:www.iame.cn
The International International 3D Printing Conference International Conference (Xi’an) International Conference (Iame Conference for Short) was originally the Exhibition and Summit of 3D printing of China (Xi’an), and has been taking place since 2017. This is an international conference on additive manufacturing, known as the most complete and authoritarian research-research exchange-research platform in the field of additive manufacturing. Pushed by the double wheels of “the academic industry +”, the Iame can be considered as the activity of the “most hardcore” industry in the industry. The conference not only gathered the best academics such as the academician Lu Bingheng to publish the latest results of scientific research, but also implemented an “innovation and entrepreneurship competition” to offer the start -up teams technological display and financing opportunities.
8. 2025 AM Exhibition of additive manufacturing technology Conclave (AM Conclave Middle East)
Official site exhibition:amconclave.com
Exhibition is the largest event in the additive manufacturing industry in the Middle East and North Africa. and cooperation. The event will attract more than 300 international representatives from more than 15 countries to participate and invite government agencies such as the Defense Water Ministry, the University of Qatar, Nikon, Edge and well -known companies to share their results as Application in the national defense, aerospace and energy fields.
9, 2025 The 5th conference for manufacturing aerospace additives
time:October 23 to 24
Place:Shanghai
hostunit:China Aviation Engineering Shanghai Commercial Aviation Engine Manufacturing Co., Ltd., Shanghai Additive Manufacturing Association, etc.
Aerospace is one of the most mature areas for the marketing of 3D printing technology. This conference will explore the orientation of industry development through technical discussions, experience exchange and new product promotion activities, and will provide a new perspective to improve the level of aerospace manufacturing technology of the China. The conference should attract nearly 500 experts from relevant national departments, local governments, academicians from the two academies, aerospace -related units, scientific research institutes, universities and relevant units of the additive manufacturing industry Gather in Shanghai to discuss the current additive manufacturing in aerospace.
10, Formnext 2025 International Precision Forming and 3D Printing Manufacturing Exhibition
Official site exhibition:Formnext.mesago.com
Since its first outfit at the Frankfurt International Exhibition Center in 2015, Formnext Germany has become the largest 3D exhibition in the world. In addition to launching new products, the exhibition will also host several conferences to promote exchanges and deepen the understanding of additive manufacturing technology. This is an excellent opportunity to meet international participants, covering a variety of areas, including aerospace, medical, automotive groups and large chemical groups. The exhibition should attract more than 800 exhibitors and 34,000 professional visitors. Looking back 2024, there were up to 111 China exhibitors.
11, 2025 Forum for the development of the additive manufacturing industry and annual meeting of the additive manufacturing industry
This is the annual 3D printing industry event, which will bring together the main experts, the upstream industry leaders and downstream of the industrial manufacturing chain, as well as Experts authorizing in transverse fields such as new materials and intelligent manufacturing. Reunion will be deepened with the discussion on the innovative application of additive manufacturing technology in aerospace, cars, biomedicine, culture and other areas, and jointly discuss integrated, cluster and ecological development paths The additive manufacturing industry. The content of the forum and the annual meeting includes, without limiting themselves, the main forums, the corporate symposiums, the promotion meetings of application scenarios, the meetings of correspondence of the supply and the request, etc. .
The above are exhibitions and industry forums that deserve to be ready in 2025 collected and compiled by the 3D printing resources library. We have verified this information, do not hesitate to participate. Non -verified activities are not included in the list of recommendations. At the same time, during the research process, we also found exhibitions or forums that do not correspond to advertising and reality.
Finally, if you are ready to participate in the 3D exhibition / Printing Forum once a year, the first choice in China is the TCT Asia exhibition, and foreign countries can choose the German exhibition of Formnext. If you have enough time, the Formnext Shenzhen exhibition is also a good choice. If you are more interested in the cutting -edge academic dynamics of the industry, it is recommended to attend the IAME conference directly. Of course, if you want to come together with your industry colleagues at the end of the year, the annual meeting of the additive manufacturing industry deserves to be visited.
